7 ways to avoid dry socket after tooth extraction

Wisdom teeth extraction is quite common among the adult population. However, the after effects of extraction pain, discomfort, or swelling is experienced by a very few. It is estimated that about 2% to 5% of tooth extraction patients suffer from dry socket later. When a tooth is extracted, a hole is left behind in the jawbone. This is called as a socket. After the tooth is extracted, a blood clot forms in the wound area. This clot is essential to speed up the healing process.

However, the blood clot dislodges or dissolves in some cases and leads to the formation of dry socket. Dry socket forms after two to three days of tooth extraction with the intensity of pain gradually increasing. What does a dry socket look like? A hollow space can be seen from where the tooth was extracted. Bone and nerve endings can also be observed when a close examination of what does a dry socket look like is done.

The bone and nerves become exposed to food, saliva, and bacteria. This leads to a lot of discomfort and pain. There can be bad breath and an unpleasant taste in the mouth as well. Sometimes, the pain can extend to the ears and affect the entire face and neck. After tooth extraction, it is possible to avoid dry socket by taking a few preventive measures:

  • It is necessary to follow a proper oral hygiene routine of flossing and brushing. It is necessary to immediately remove any food particles that might get lodged in the empty socket.
  • A dentist can prescribe a medicated oral rinse that helps the healing process to be quicker and avoid the development of dry socket.
  • A solution of salt and warm water can be used to rinse the mouth after every meal. This removes excess bacteria from the mouth.
  • The wound at the extraction site should not be touched at all, other than to remove gauge or any medicated paste. This should be done by a dentist to avoid any damage to the empty socket.
  • Smoking or drinking through a straw should be avoided for at least 24 hours after tooth extraction.
  • For four days following tooth extraction, avoid the consumption of food that might leave debris between the teeth. Peanuts, popcorn, pasta or any hard food should be avoided. Have soft and easily chewable food such as soups, pudding, mashed vegetables and so on.
  • Avoid drinking sugary and carbonated beverages and juices.

    RECENT ARTICLE

  • Tips to choose the right inpatient drug rehab center
  • Tips to buy auto parts online
  • Why G-Shock watches are so resilient and unconventional
  • 6 common endocrine disorders that can disrupt bodily functions

YOU MAY ALSO LIKE

  • Popular therapeutic shoes for women

    Orthopedic shoes are a rarity. Even after you manage to get your hands on orthopedic shoes, finding something stylish can be hard. Many women suffer from neuromuscular issues in their skeletal system, especially in their ankles and calf regions. Getting a doctor-prescribed orthopedic shoe can be a lifesaver.

    Wide width shoes which are designed for orthopedic use is a blessing in such cases. If you are a woman who has wide feet and feels pain when you move around, look for a pair of therapeutic wide calf boots.

    How do you get a pair of shoes that are light, therapeutic, awesome and doesn't break the bank? Welcome to the popular two wide therapeutic shoes for women.

    Dr. Comfort refresh-X therapeutic women's shoes
    These are crafted with leather and are deep enough to fit in feet which need enhanced support. Most women will find these shoes to be comfortable and a good fit for their feet. These shoes don't compromise on design and can compete with any other shoe. The depth is bigger than that of tennis shoes and the leather and mesh composition makes the shoes easy to clean and maintain for regular use.

    A gel insert is included with the shoes and has an elastic lace enclosure for added comfort. The buckle and the lace closure makes sure you don't have to bend over to tie your shoes which can be of great benefit to those with knee and joint problems. You can fasten and loosen the shoe effortlessly.

    These wide width shoes come in sizes four to twelve and are ideal for exercising and outdoor activities for women with big feet. The Dr. Comfort extra wide women's shoes come in feet widths of D, 2E, and 4E.

    Dr. Zen Lori's extra wide therapeutic women's shoes
    These shoes are suitable for those with diabetic feet and come with an Achilles tendon support. It comes with a Thomas heel and rocker support. The shoes are made up of a high-quality leather and mesh which enhances breathability and prevents moisture from accumulating inside the shoes. It's reinforced counter and rigid shank holds the feet in place and ensures proper alignment. The shoe is designed primarily for diabetes patients but is geared for all users.

    You can take out the removable spacer insoles fitted inside the shoes to install your custom orthopedics. There are a total of two removable insoles so, if you need extra space or wider width, you can take them out too.

    These shoes provide you with ample comfort and relief to get you going throughout the day if you suffer from mild to moderate hammertoes. It comes in sizes six to twelve and the color choices available are white, white and pink, white and purple, and white and blue.

  • What You Need To Know About Fiesta Dinnerware

    Fiesta dinnerware was introduced in the year 1936 during the Great Depression. It has enlivened tables since then. The proprietor Homer Laughlin used the technique of single-color glazing to cut down on manufacturing costs. The Art Deco styling has concentric rings and coupe shape. Fiesta dinnerware is available in full sets and open stock. The company returned with the Fiesta line again in 1986 after discontinuing in the year 1972. Fiesta dishware is available both online as well as in retail outlets. Buyers and collectors of Fiesta dinnerware know what to look for when scouting to buy contemporary and vintage Fiesta pieces.

    Using a Fiesta Dinnerware guidebook
    Fiesta enthusiasts go through guidebooks to know more about this cheerful dinnerware line. Collectors authenticate every piece by referring to photographs, comparing backstamps and colors. These guidebooks have information on the year of manufacture, marks, color, and rarity. Fiesta enthusiasts always seek lids that are broken or lost. You will also find collectors to prize discontinued dishware like a turquoise onion soup bowl.

    Know the vintage Fiesta colors
    The company introduced the Fiesta line in green, cobalt blue, red, ivory, green, and red. The dishes were finished with semi-opaque and smooth glazes. The pieces that display uneven glaze application are called a glazed curtain. In 1937, the color turquoise made the entry in the palette. Until 1944, a little amount of uranium oxide was used to give the “radioactive red” dishes their color. The color was reintroduced in the year 1959 using depleted uranium. This practice ceased to exist in 1972. The Environmental Protection Agency has advised the people not to use vintage Fiesta dinnerware to keep food.

    Major color change
    The original colors introduced in this line lasted till the early 1950s. The colors green, ivory, and cobalt blue were replaced by forest, chartreuse, gray, and rose. Vibrant colors made its way again in the early 1960s before discontinuing in 1972, slowly giving passage to earth tones by 1969.

    Contemporary Fiesta colors
    As the original Fiesta line ceased to be manufactured in 1972, collectors began to seek these pieces as desirable vintage dishware or a nostalgic reminder. In 1986, Bloomingdale paired with Homer Laughlin to manufacture a revamped Fiesta line again. They are made using restaurant-grade ceramics that counter moisture and smells. The new dinnerware range offers lead-free glaze. They are made using restaurant-grade ceramics that resist moisture and odors.

    Certain original colors are still there
    The company has been releasing dishware in a new color every year since 1936. Fiesta has been made in 40 colors at least. Some of the original colors that are still in circulation are turquoise, ivory, and cobalt blue. There are other shades which are updated versions of the original colors. Contemporary hues include peacock, plum, sunflower, and lapis.

    Find complementary products
    The company also manufactures tableware and cookware to complement the dinnerware. There are Fiesta flatware, linens, and glassware to set the table in sync. Since 2009, the company has started manufacturing mugs, bowls, square salad, dinner, and luncheon plates. The square outline has the signature concentric rings and coupe shape. Fiesta has non-stick cookware, including mini casseroles and Dutch ovens in classic colors.

    Care for Fiesta Dinnerware
    Fiesta dinnerware is sturdy but people should take care to avoid chipping of the product. They are microwave-freezer and dishwasher safe. Use wood or plastic tools while cooking in Fiesta crockery. The dishware must be washed with warm water and non abrasive detergent. One should never slice vegetables or fruits on the plate as the same can mar the surface. For flatware scuffs and gray marks, use gentle copper cleaner. In fact, the iconic Fiesta lady who is shown as a flamenco dancer on the box is made of a resin figurine in colors such as white, lilac, and persimmon.

    People who own Fiesta dinnerware and cookware are very proud of their possession. Fiesta range of dinnerware is available on eBay and other websites as well.

  • Causes of frequent urination problems in men
    Urinary problems in men are quite common. These problems can range from frequent urination to pain in the bladder and overactive bladder. Frequent urination is when you need to empty the bladder more than (at least) eight times in a day. Frequent urination problem is also associated with the urgency to empty the bladder. This is medically referred to as an overactive bladder (OAB). In OAB, frequent urination is a problem rather than a symptom of another disease. Causes Frequent urination problems can occur due to many medical conditions. These can range from minor to major health concerns.
    • Urinary tract infection (UTI): Any infections in the urinary tract can lead to frequent urination. The infection is accompanied by abdominal discomfort or pain and fever.
    • Prostate problems: When the prostate becomes enlarged, it can push against the urethra wall and impede urine flow. The urethra is the thin tube that transfers urine out of the bladder. With the constant pressing of the urethra, the bladder begins to contract even with little urine present inside it. The contractions cause frequent urge to urinate.
    • Diuretic use: Medicines that treat high blood pressure and some kidney problems like fluid buildup can cause frequent urination in men.
    • Diabetes: Frequent urination problem can be a symptom of diabetes (both type 1 and type 2). Large amounts of urine can occur due to diabetes as the body eliminates unused glucose through the urination process.
    • Neurological problems: Any neurological damage or problems such as a stroke can cause bladder function disorders. Multiple sclerosis and spinal cord injuries often cause frequent urination. These problems can cause the nerves associated with the bladder to malfunction.
    • Bladder cancer: Urination frequency can increase when the bladder is damaged due to cancerous cells.
    • Radiation therapy: Radiation treatment for any cancer can lead to frequent urination. However, this is not very common.
    • Bladder dysfunction: When any bladder problem occurs, often it can lead to frequent urination problem.
    Frequent urination is treatable with the help of medications, surgeries and diet modifications. Your doctor can recommend a treatment plan based on your health needs.
  • Things You Should Know about Hearing Aids
    As per the reports of World Health Organization, 360 million people are affected by hearing disability. The risk factors of the hearing loss vary from countries and countries and there has been a gradual increase in this scenario. However, generally, chronic exposure to blast or cacophony and aging are seen as prime risk factors for this health condition. How do you know you have a hearing defect? The symptoms of hearing loss differ from person to person and few of the common symptoms are mention here.
    • Trouble in hearing continuously
    • Muffling of speech
    • Challenges in hearing spoken words
    • Unable to hear things without turning the volume up at an unusual level
    • Lack of communicating with people due to hearing of unclear sounds
    • Isolation from society
    What do you need to treat the condition? The first and foremost thing that you should do is to consult with the doctor to know what measures you are capable of undertaking to get rid of hearing the issue. If the condition is too severe, the doctor can advise you to get Specsavers hearing aids.
    • The electronic hearing device has the capability of letting you hear things in quiet and loud places. Specsavers hearing aids have the features to help a person with clear sound.
    • Speaker, amplifier, and microphone are three fundamental components of the Specsavers hearing aids. Through receiving the sound waves from the microphone and then converting the sound waves through the amplifier. The amplifier can increase the capability of signals and send to the ear through the speaker.
    Features of the hearing device The features of hearing devices from Sivantos and Advance are sure to help any person with severe hearing issues. Moreover, the cutting-edge technology used in the devices help the individuals to come out of isolation and develop social skills efficiently. Reducing wind noise The sound waves of the wind can create certain hearing problems for the people undergoing hearing defects. People fail to grasp the words of the others in the wind as the irritating sound of wind can overpower the functions of conventional microphones.
    • Averting this problem, the hearing machine recognizes the windy condition and adapts itself in that condition for providing the user with a maximum level of hearing functionality.
    • Outdoor enthusiasts with a hearing problem can indulge themselves in the leisure activities like golf while using the advanced hearing aids.
    Directional Microphone The hearing machines from Phonak Belong and Signia Primax generally come with the feature of directional microphone. This feature offers two microphones to the user - one which can focus backward and the other one can focus on forward.
    • The omnidirectional microphone can recognize the sound waves from every direction and make use of the amplifier of every sound wave. However, the directional microphones help you target the hearing as per your needs.
    • The sound amplification from the back is reduced through the directional microphones and the focus is shifted to the front sound objects more.
    • Automated directional microphones choose the mode of function depending on the listening environment.
    • In quiet places, the automatic directional microphones can operate the adaptive directional feature and directional feature simultaneously.
    Feedback Reduction The emission of whistling sound is categorized as feedback cancellation. Whistling can occur due to the ill-fitting with a sound that can escape through a vacant slot. Due to this problem, the user needs to adjust the device continuously so that it fits tightly. Moreover, another thing that causes this problem is wax.
    • The feature of feedback cancellation is regulated by an electronic system.
    • Feedback frequencies are the main concern of the feedback cancellation option.
    • The feature reverses the feedback signal and mixes the frequencies with the actual one.
    • The adaptive feedback cancellation feature offers help to the users with adapting the speed of the function. In this way, the performance of the operation in various environments is enhanced.
    • People can hear the phone call clearly or can listen to the alarm beeps and music with the aid of adaptive feedback cancellation hearing aids.
    Apart from these features, the Specsavers hearing aids offer frequency bands, transient noise reduction along with speech enhancement.
  • 4 printing mistakes and ways to avoid them
    When it comes to printing, some mistakes can prove more costly than others. It is important to learn to recognize mistakes early and correct them so that you can get the best quality prints. From leaving the right margins to choosing the correct print quality, being aware of minor details can help. Here are four common printing mistakes and ways to avoid them, so you get a quality print each time. Not creating bleeding space Even though machines have become far more precise in cutting artwork to its intended size, you may still find 1-2 mm of inconsistency. Not adding bleeding space will result in a thin white border around your artwork. To rectify this, create a bleed or extra space of 5 mm around your image, so even if the paper moves, there won’t be any white space on the print. Printing in RGB If you’re wondering why your print doesn't match the colors on the screen, it may be because you are printing in RGB color mode. Artworks and documents set in RGB are meant for digital viewing, whereas those set in CMYK are meant for print. To avoid this error, ensure that the color mode of your design is set to CMYK. Typos and errors Grammar, spelling mistakes, missing fonts, and smaller font sizes can hurt your print’s appearance. Documents with these errors can appear unprofessional or even illegible. To avoid this, set the smallest font size of the document to at least 6 pt. You can rasterize or convert your text to a Smart Object, if you are using Photoshop, or to outlines, if you are using Illustrator. Proofread your document several times. You can even ask a friend to do it for you, or use an online spell check program to avoid any spelling mistakes and grammatical errors. High ink coverage Images that require too much ink to print can cause the paper to bruise or wrinkle since the paper’s ink absorption capacity is limited. Avoid this mistake by using a preflight tool to check the ink coverage of your artwork. This tool checks which images require too much ink to print, so they can be edited accordingly. You can also opt for preflight tools that are specially designed for lowering the ink coverage of an image. It's important to remember that there is always space to make edits while printing. Double check your work before printing or sending them to a printing shop to get the best quality prints each time.
  • 6 early signs of multiple myeloma
    When one suffers from multiple myeloma, this blood cancer forms in their healthy plasma cells. These white blood cells can produce antibodies that identify bacteria and fight them, helping prevent illness. In this disorder, the bone marrow produces too many cancerous plasma cells, which replace normal blood cells. In addition, an abnormal protein produced by these cancer cells can lead to complications. Here are early signs of multiple myeloma that one should know. Early signs of multiple myeloma While this condition may not cause symptoms in the early stages, it can lead to various severities. It is usually discovered during a routine blood test or, in some cases, a urine test. Some of the early signs of multiple myeloma include the following: Bone pain This condition can directly affect bone density and lead to pain in the back, ribs, and hip bones. Usually, people experience it as a dull, aching pain that gets worse with movement. Weak bone strength can also result in fractures of the spine and long bones like the arms and legs. It can also compress the spinal cord, causing numbness in the legs. Anemia Anemia interferes with blood cell production in the bone marrow, resulting in the body's lack of red blood cells. Such a problem occurs when plasma cells from myeloma suffocate or crowd out healthy red blood cells. Anemia could also be a side effect of myeloma treatment. Low red blood cell counts in the body cause fatigue, weakness, and shortness of breath. Repeated infections People with multiple myeloma are particularly vulnerable to infections because the condition disrupts the immune system. Low immunity can cause fever and infections, particularly in the upper respiratory tract and lungs. Such an issue makes fighting infections harder. Raised blood calcium levels Excess calcium released into the bloodstream from damaged bones can cause hypercalcemia. Its symptoms include intense thirst, stomach pain, frequent urination, constipation, and drowsiness. Unusual bleeding Cancerous cells in the bone marrow may prevent the production of platelets, i.e., blood-clotting cells. Those with multiple myeloma may develop bruises and bleed, including heavy menstrual cycles, nosebleeds, and bleeding gums. Thickened blood Excess proteins produced by myeloma cells may cause the blood to thicken more than usual. This disorder is known as hyperviscosity and can cause symptoms such as blurred vision, headaches, dizziness, and shortness of breath. One should report symptoms to a doctor to avoid complications and get prompt treatment.