Essential qualities to look for in water heating equipment

Ranging from a build-up resistant built to flaunting a digital display, the qualities of a water heater make it a truly great unit to have. The following section highlights the essential traits that every good water-heating unit should feature.

  • Build-up resistant built…One of the biggest issues that water heaters eventually run into is the problem of mineral build-up. The scale build-up adversely reduces the lifespan of a water-heating unit and obstructs its normal operation as well. While most of the tank water heaters come with an anti-scale feature to minimize the scale build-up, there is no shortage of inexpensive, low-quality water heaters with no or little consideration to the problem. Thankfully, one need not invest in a stellar unit. Going for any water-heating unit with 10-year or more warranty ensures protection against the scale build-up problem.
  • Corrosion-free tank…The issue of corrosion is prevalent in tank water heaters, especially in the traditional units. To avoid the problem, look for tanks made from stainless steel or featuring an anti-corrosion lining on the inside. Different water heaters come with different levels of corrosion protection. While some offer partial protection against the problem, others are protected fully against corrosion. The latter ones cost a little more than their former counterparts.
  • Digital display…Most of the modern water heaters come with a digital display to give you a heads up on what exactly is going behind the scenes. A digital display gives you information on the temperature and pressure inside the water heaters, along with other vital information about the water heating operation. Some high makes even allow you to make use of a timer to schedule the water heating operation.
  • Drain valves…Drain valves are present at the base of a water-heating unit and facilitate draining the heater while using the unit together with a garden hose. There are two types of drain valves, one made using fragile plastic and the other is a sturdy brass built. Needless to say, brass drain valves are preferred because of their durability. However, plastic builds can fulfill small gardening water requirements too.
  • Extended warranty…One of the most benefiting features of water heaters is their long warranty period. A typical water heater, irrespective of its type, comes with a long warranty period ranging anywhere from 5-10 years. A longer warranty period is another way of assuring that the unit will not run into any issues when used within the limits confined for its operation. It also ensures the unit owner to get proper compensation for manufacturing defects. Some top-tier water heaters come with warranties as much as 15 to 25 years. You need to pay a little extra for bagging these units than their shorter warranty makes.

A great water-heating unit not only lets you enjoy a refreshing shower, but also fulfills your hot water requirements for a long time. So, choose wisely.

    RECENT ARTICLE

  • Know about the Prepaid Cell Phones
  • 4 websites that offer great deals on refrigerators
  • Home remedies for poison ivy relief
  • Best sedans from the year 2016

YOU MAY ALSO LIKE

  • Advantages of using Crock-Pot appliances
    Crock-Pot® is a countertop slow-cooker that helps simmer food on low heat for a long time. Crock-Pot® allows unattended cooking for hours of dishes that can be boiled, like stews, soups or pot roasts. The Crock-Pot® usually has a circular or oval cooking pot made of porcelain or ceramic, surrounded by a metal that has a heating element and a lid made of glass. The lid usually sits in a groove of the pot to let vapor sit in the groove and seal the pot with low pressure. The pot by itself acts as a reservoir of heat, but the heat has two to three different settings for monitoring heat. The heat settings usually include a regulation of low, medium and high with some Crock-Pot® appliances also providing the option of “keep warm”. The process of using Crock-Pot® appliances involves adding a liquid such as water, stock or wine along with other food to be cooked inside it. The advantage of using such slow cookers is that it becomes almost impossible for the food to burn. Overcooking, however, should be taken care of. Crock-Pot® can also be used for preparing food at an earlier time and keeping it warm for the rest of the day. Some Crock-Pot® appliances are portable too and are great for outdoor settings such as a picnic or a cook-out. Parties, get-togethers, and gatherings can have delicious warm food with the help of Crock-Pot® appliances. While slow cookers help cook food on slow heat, an instant pot, also known as instapot is a fast pressure cooker. Pressure cooking is a faster way as it seals the pot with heat and high pressure. It seals in moisture and flavor together to take food from frozen to cooked in a short period of time. Most instant pots, however, also double as slow cookers or crock-pots as they have a heat management system that allows for slow cooking as well. There are many differences between a crock pot and an instapot. One main difference is that an instapot has insulated housing which a Crock-Pot® does not and this helps in energy saving and efficiency. Another factor involved is how far in advance one plans to cook. If one is impulsive, an instapot works best for them as they can immediately cater to their craving, while planners benefit from Crock-Pot® to add as much flavor as possible.
  • Rheumatoid arthritis – Things to avoid to manage the condition
    Rheumatoid arthritis or RA is the inflammation of joints, leading to cartilage degeneration. It is an autoimmune disease wherein the immune system attacks the body's tissues and can be caused by the wear and tear of the joints. It is estimated that more than 20 percent, which is over 50 million people, get diagnosed with rheumatic conditions like arthritis. Here are some things to avoid in daily lives for better management of rheumatoid arthritis. Leading a sedentary lifestyle A sedentary lifestyle is one of the biggest risk factors for rheumatoid arthritis. Lack of movement can weaken the joints, making it challenging to manage rheumatoid arthritis. Doctors recommend doing some light intensity exercises to relieve pain due to arthritis and help build stronger joints. Bad posture Bad body posture can put excess weight on weakened joints, which can worsen rheumatoid arthritis. A good body posture reduces the pressure on the joints, thereby reducing other symptoms like excess joint pain and trouble walking or doing simple chores. Wearing high heels High heels can put a lot of pressure on the hips and knees. This can aggravate arthritis symptoms. The cartilage around the joints can get damaged further, resulting in pain and inflammation. Performing high-intensity exercises Joints tend to weaken with age, and performing specific exercises damages the weakened joints and aggravates rheumatoid arthritis caused by inflammation triggered by exercising. Consuming refined carbohydrates Refined carbohydrates such as white flour, rice, pasta, pizza, and many breakfast cereals have little to no nutrient value. Having too many sources of refined carbohydrates in one's meals can increase and worsen arthritis symptoms. Consuming refined carbohydrates with refined sugar in the form of pastries and cakes can be even more harmful, as they can increase inflammation and pain. Eating processed foods Processed foods contain high amounts of preservatives in the form of MSG (monosodium glutamate). These preservatives can increase the amount of sodium and uric acid in the body. Excess uric acid in the body can result in its crystallization in the joints, resulting in pain and inflammation. Drinking aerated drinks Aerated or carbonated drinks contain high amounts of sugar. These drinks increase the risk of one putting on visceral fat and being diagnosed with diabetes and reduce the body’s ability to absorb calcium. Low calcium levels in the body increase the risk of osteoarthritis. Women with low calcium levels stand a greater chance of getting rheumatoid arthritis. Otezla® (apremilast) is used to treat the symptoms of active psoriatic arthritis in adults that works by inhibiting an enzyme (phosphodiesterase 4) within the immune system that can affect certain cells and contribute to inflammation in the body. In very early studies, Otezla showed potential in the treatment of RA.
  • Four must-have skills for babysitting jobs

    Babysitters need to have a number of skills that let them perform their daily tasks with the babies better. As a babysitter has to deal with children, the basic skills involve being loving and caring towards kids. If someone wants to sign up for a babysitting job, it is necessary to be loving towards kids and be able to be friendly with them so that they mingle easily with you.

    Here are four skills that a babysitter must have to be at his or her best. Take a look!

    Be patient
    Babysitters have to be patient with the kids they look after. Children of all ages, right from newborns to toddlers, have different nature. In order to keep them comfortable, one needs to be patient with them and understand their likes and dislikes. For instance, if children are asked to perform a task, they might take up a lot of time to do it or even refuse to do so. It is the duty of the babysitter to make them understand and remind them how to do the task again and again. Patience plays a key role here.

    Loving and alert
    As a babysitter, one cannot be busy with his or her phone calls, emails or text messages. These traits do not make a babysitter's job effective. They are ought to be attentive and loving towards the kids. If you don't show your love towards the baby, it would be very difficult to interact with the baby. A good babysitter would listen to the kid carefully and interact in a loving way to make the child comfortable.

    Problem-solving attitude
    Every job has its own set of problems but it is imperative to find a solution for the same. As a babysitter, you must find the right solution to every issue at work and implement the same effectively. A problem at a babysitting job can range from the kid crying to being uneasy. So as a babysitter, one must make sure that these problems are quickly resolved.

    Entertainment skills to keep the child involved
    Not every child is comfortable with a babysitter or any outsider. Therefore, babysitters need to have kid entertainment skills, which will not only keep the child engaged but also make him or her interactive with the babysitter. One should have the ability to come up with innovative games and creative learning skills that help the child to be entertained as well as learn something new.

  • Things to know about credit card processing
    For anyone who owns and uses a credit card, while the extension of credit is no doubt beneficial, a point of concern always is about the charges levied. When choosing a credit card processing agency to work with, try to sign up with processors who offer you the lowest possible markup rates for your specific usage requirements and the pricing model you opt for. Do not get mislead by offers of lower interchange and assessment fees as these are for the most part standardized among credit card processors and hence, non-negotiable. While all credit card processors operate under strict norms about interchange and assessment fees, what varies is the pricing method they offer to their clients. There are two commonly used pricing methods – interchange plus, also known as pass through and bundled or tiered pricing. The major advantage of the interchange plus pricing model is that regardless of the type of card or the process involved, the processor receives a standard fixed percentage. With interchange plus pricing, you receive interchange credits on refunded transactions. Also, interchange plus pricing gives you the advantage of benefitting from reductions in interchange rates whenever the legislature sanctions them. Under bundled or tiered pricing, the credit card processing agency offers qualified, mid-qualified and non-qualified tiers for pricing. This may also vary based on the type of card used. The flip side of bundled credit card pricing models is lack of transparency among some card processors especially about giving you information about which tier a particular transaction is being processed through. Sometimes, you may end up being a considerable amount of the standard assessment and interchange fees. The reason for this is that there is no standardization of how each tier is classified and often the mid and non-qualified pricing tiers may receive a greater proportion of interchange fees, thus raising your costs. Credit card processing fees are usually of three kinds – volume based, transaction fees or flat fees.
  • 4 great reasons to buy shoes from a clearance sale
    Ever wondered whether discounted shoes were worth your time? Well, chances are, maybe you've never tried getting a pair of discount shoes online. Discounted shoes are a great way to save on cash, rack up less on credit card debts, and most importantly, buy more for less. Technically speaking, it's buying the same thing at fiendishly low rates. You can get that lovely pair of Birkenstock shoes for discounted prices of up to 80%. Clearance sales are great because that means shops are trying to get rid of products that haven't sold. If you love comfortable and durable shoes but don't mind the late sell times, it can be a great deal for you. Here are five awesome reasons why discount shoes online are great bargains. You buy more for less: That's the buyer's mantra for clearance shoe sales. What you would never normally find being sold for less than normal rates, you'll find it there. If you're lucky, you can snag a luxury designer label shoe from a clearance sale too. It's just that great and nothing beats the rush of buying killer products for a pocket change. Literally. You get the best quality: Some discount shoes come second hand. However, most of them are maintained well enough to feel like mint condition. Online stores may do their own repairs on shoes. You can also look into the option of customizing a second-hand shoe. Nothing beats the price tag on them. You buy for super low prices: That is why they are called discount shoes. They are available in clearance sales both online and offline and you can get steal deals with these. Sometimes shoes can be sold in multiple pairs too or in a collection. Even most designer brands won't be able to sell a couple of pairs in a collection. Clearance shoes can be a great way to get to these. It's like an underground online jackpot put out in broad daylight for sale. They are sold online: You don't necessarily need to physically travel to the clearance site to buy a decent pair of shoes. Most clearance sales are hosted online and you can bargain on the prices. Some of them even accept coupons which can be a great way to exploit further discounts on top of their regular discounted sales. You can buy as much as you want and they ship pretty quickly. You get various shipping speed options too. Some clearance shoes can be returned within a set timeframe, If you're unhappy with the quality, they can send a replacement instead. That's their main selling point.
  • The Difference Between LDL and HDL Cholesterol
    Cholesterol is a lipid-like substance used by the body as a building block to produce vitamin D, hormones, and digestive juices to help break down the fats you consume as a part of your diet. High-density lipoprotein (HDL) and low-density lipoprotein (LDL) are the two types of lipoproteins. They are responsible for carrying cholesterol to and from the body’s cells in the blood. There is a third type of well which is called very low-density lipoproteins (VLDL). Read on to know the basic difference between cholesterol HDL and LDL levels. HDL is also known as the “good cholesterol”, while LDL is referred to as the “bad cholesterol”. HDL protects the body against narrowing blood vessels while LDL may make blood vessels even narrower. The difference is stark and hence the reason why they are called good and bad. VLDL contains a high number of triglycerides and is produced in the liver. Cholesterol HDL and LDL levels are interpreted in the opposite manner. The higher the levels of HDL and the lower the levels of LDL, the better it is. In other words, if your HDL levels are higher, you are at a lower risk of contracting diseases like a stroke, vascular diseases, coronary artery disease, and heart diseases. They also have a protective effect on the blood vessels and may prevent cardiovascular diseases from developing in the body. Mentioned below are the cholesterol levels, an HDL and LDL chart usually depicts: LDL cholesterol level
    • Less than 100 mg/dL – Optimal
    • 100-129 mg/dL – Near optimal/Above optimal
    • 130-159 mg/dL – Borderline high
    • 160-189 mg/dL – High
    • 190 mg/dL and above – Very high
    HDL cholesterol level
    • Less than 40 mg/dL – A significant risk factor for heart disease
    • 40-59 mg/dL – The higher it is, the better
    • 60 mg/dL and above – Protective against heart disease
    Both types of cholesterol, HDL and LDL, are necessary for the proper functioning of the body. The problem arises when the levels of cholesterol in the body move beyond the ideal levels. It leads to fat depositing in the blood vessels, thereby causing them to narrow. The narrowing of blood vessels can pose a problem as it can lead to several diseases. To avoid excess cholesterol, have more fruits and vegetables as well as whole grains. At the same time, maintain a good diet and lead a healthy life by reducing your intake of red meat, cookies, and food items rich in saturated fat.